|
|
| *
|
In order to keep High Power LEDs in lower temperature, MCPCBs require additional heat sink to dispatch heat from LEDs to the air
|
| * |
The lower temperature of High Power LED has, the longer lifespan of the LED will be. |
| * |
Caution: The temperature on MCPCB must be lower than 70¢J while operating.
|
|
| |
|
|
Thermally Conductive Tape |
| *
|
Customized size of thermally conductive tape is available.
|
|
| |
|
TT-THD4 SPECIFICATION
Property
|
Range |
Unit |
Test Method
|
Color |
Gray |
( --- )
|
Visual |
Thickness
|
0.5 |
mm |
ASTM D374
|
Thermal Conductivity
|
3.2 |
W/m-k |
ASTM D5470
|
Specific Gravity
|
2.28¡Ó0.2
|
g/cm 3 |
ASTM D792
|
Weigh Loss
|
¡Õ 1 |
% |
( @204 ¢J /24hrs
|
Dielectric Breakdown Voltage
|
¡Ö 7 |
KV/mm |
ASTM D149
|
Flame Rating
|
94V-0 |
|
UL |
Surface Resistance
|
10 17 |
Ohm |
ASTM D257
|
Elongation
|
130¡Ó13
|
% |
ASTM D412
|
Tensile Strength
|
8¡Ó2 |
kgf/cm 2
|
ASTM D412
|
Hardness
|
20¡Ó2 |
3hore A
|
ASTM D2240
|
Temperature Range
|
( -50 ~ +220 )
|
¢J |
( --- )
|
|
| |
|
|
|
Part NO. : TT31AL1
-
Heatsink Dimensions : 100mm (L) x 26mm(W) x 15mm (T)
-
AL Heatsink for
TT31-3 (1W LED*3pcs)
-
Weight : 50g
|
 |
| |
|
|
|
Part NO. : TT41AL1
-
Heatsink Dimensions : 290mm (L) x 30mm(W) x 15mm (T)
-
AL Heatsink for
TT41-8 (1W LED*8pcs)
-
Weight : 130g
|
|
|
| |
|
|
|
Part NO. : TT61AL1
-
Heatsink Dimensions : 298mm (L) x 20mm(W) x 15mm (T)
-
AL Heatsink for
TT61-10 (1W LED*10pcs)
-
Weight : 150g
|
| |
|
|
|
Part NO. : TT61AL2
-
Heatsink Dimensions : 300mm (L) x 23.4mm (W) x 8.25mm (H)
-
AL Heatsink for
TT61-5,TT61-10 (1W LED)
-
Weight : 40g
|
|
|
|
|
Part NO. : TT62AL1
-
Heatsink Dimensions : 298mm (L) x 20mm(W) x 15mm (T)
-
AL Heatsink for
TT62-10 (1W LED*10pcs)
-
Weight : 150g
|
|
|
|
|
Part NO. : TT62AL2
-
Heatsink Dimensions : 300mm (L) x 23.4mm (W) x 8.25mm (H)
-
AL Heatsink for
TT62-10 (1W LED)
-
Weight : 40g
|
| |
|
